BOILERS & MAINTENANCE
Lanemark brings proven process
heating to small brewery sector
The specialist processing needs that are
central to the growing number of mini- and
micro-breweries in the UK all have a number of
production methods and objectives in common
– with accurate, controllable vessel heating
always high on the list.
Lanemark Combustion Engineering Ltd. has
been at the heart of this scenario for many
years with its range of gas fired process tank
heating (TX) small diameter immersion tube
burner systems – which can operate using
either natural or propane gas. The designs
are used in particular with vertical cylindrical
coppers and hot liquor tanks in, typically, 5 to
80 UK barrels (80 to 130 hectolitres) brewing
enterprises.
“Gas offers clear-cut economies of use
compared to alternatives such as electricity
or steam,” says Lanemark Sales Director Jeff
Foster. “In all cases, our designs comprise
a burner firing through the wall into a
submerged, small bore tubular heat exchanger
to achieve heating that is both evenly
distributed and, typically, in excess of 80%
efficient.”
Because brewing vessels are often cylindrical,
Lanemark has also developed a helical coil
tube design which sits on the base of the tank
and follows the curved wall in a circular layout.
Accuracy of control is optimised via Lanemark’s
optional modulating temperature/gas input
controls which allow the brewer to maintain the
ideal rolling boil brewing temperature.
Importantly, all Lanemark burner designs
can be supplied complete with Lanemark’s
BurnerCare support service. Ranging from
installation, commissioning and service and
maintenance scheduling to a rapid response
call out facility, it translates into genuine peace
of mind for all users across the sector.
For more information visit www.lanemark.com
Gas Process Burners
Lanemark gas burner systems offer users reliable, high effi ciency,
process heating solutions.
FD Series Packaged Oven/Dryer Burners
Specifi cally designed for process air heating applications in convection
ovens and dryers
High turndown/short fl ame lengths providing accurate process
temperature control
High effi ciency gas + air modulation, gas only modulation and simple
high/low control options
Heat Input Range: 9 kW – 1550 kW
•
•
•
•
FD-C high turndown oven/
FD-E low cost high turndown
dryer air heating burners.
oven/dryer air heating burners.
FD-GA modulating gas + air
process air heating burners.
TX Series Gas Fired Process Tank Heating Systems
High effi ciency (80%+) heating of all types of spray and dip process tanks
Compact high effi ciency small diameter immersion tube heat exchangers
occupying minimum tank space
Accurate performance modelling using Lanemark TxCalc design software
Heat Input Range: 15 kW (1½") – 1150 kW (8")
•
•
•
•
Midco HMA Series Air Replacement or “Make-Up” Air Heating Burners
Direct fi red, high effi ciency burner systems, for high volume air heating
applications such as paint spray booths, ovens and dryers.
Supplied either as Midco burner heads for OEM system integration or
as Lanemark DB or FDB complete packaged systems including modulating
gas valve trains and controls
Wide range of fi ring rates to suit alternative temperature rise and air
velocity system requirements
DbCalc system design software
•
•
•
Midco HMA high efficiency,
high turndown, air replacement
or “make-up” air heating burners.
TX high efficiency small diameter
immersion tube tank heating
systems.
Lanemark Combustion Engineering Limited
Lanemark House, Whitacre Road, Nuneaton, Warwickshire CV11 6BW United Kingdom
Tel: +44 (0) 24 7635 2000 Fax: +44 (0) 24 7634 1166 E-mail: [email protected]
www.lanemark.com
X4620 PECM
Lanemark Ad
SDAW.indd
26
Issue
44 1
•
COMBUSTION ENGINEERING
31/08/2016 09:04