Dust Control Systems Selector

The best tools , vacuums , and dust removal accessories to help clear the air , add productivity on the jobsite and help meet OSHA 1926.1153 Table 1 compliance .

APPLICATION TOOLS AND VACUUMS DUST CONTROL ACCESSORY

SDS + DRILLING / CHISELING

Rotary hammers - Cordless Rotary hammers - Corded Universal vacuum cleaners Air scrubbers TE 2-22 TE 4-22 TE 6-22 TE 30-22 TE 2 TE 2-S TE 3-C TE 5-22 TE 6-CL TE 30 TE 30-C-AVR VC 75-22 VC 140-2-22 VC 150-6 X VC 150-10 X VC 150-6 XE VC 150-10 XE VC 300-17 X AIC 1000

DRS TE 4 / 6 2268002

DRS-5 2342387

2256700 2253092 2253085 2253115 383249 228098 3553166 2327368 2251583 2160200 3578572 2248004 2254438 3721395 2220086 3720112 3721394 3563662 2375473

Hollow drill bit

Dust removal system TE-CD DRS-D DRS-C

Requires 129 CFM for safe set anchor compliance

* When used with SafeSet systems , the VC 125 must be used with 3 / 4 inch diameter minimum TE-CD / YD hollow drill bits

Compatible with TE 3-C / -M, TE 7 / -C, TE 4-A 22 , TE 6-A 22 / 26 , TE 30 ( 30-C and A 36 ), TE 300-A36

2191207 2213351

SDS-MAX DRILLING / CHISELING

CONCRETE BREAKING

Hollow drill bit

Dust removal system TE-YD TE DRS-Y DRS-D

Requires 129 CFM for safe set anchor compliance

* When used with SafeSet systems , the VC 125 must be used 3 / 4 inch diameter minimum

TE-CD / YD hollow drill bits 2055718 2191207

Dust removal system DRS-B

Not to be used with TE 3000-AVR 365944

Tuck pointing / cutting Grinding Slitting

4.5 ” 5 ” 4.5 ” 5 ” 5 ”

CONCRETE CUTTING AND GRINDING

DG-EX 180 / 7 Table 1

Table 1 Table 1

Table 1 2201030 vacuum vacuum vacuum vacuum

To be used with VC 300 for requirement : requirement : requirement : requirement : diamond grinding with

150 cfm 150 cfm

150 cfm 150 cfm

DG-EX 180 / 7

3554361 3554440 3564653 3564654 3578887 2248340 2267006 2270844 2215472 2254438 3721395 2220086 3720112 3721394 3563662 2375473

2101312 284978 2102983 2126539 267720 DCH depth gauge / dust shroud DCH 230 DCH 300-X

DWP 10 Tank 365595

2194877 2232387 3444488 2149601 3721395 2220086 3720112 3721394 3563662 2375473 212187 212131

2043846 274935 3685890 3496543 3731692 3536957 3536965 3679407 365595 2315588

3563745 3538194 3539189 3803049 3821500 2124505 365595 365595 431364

1 Hilti ’ s manufacturer guidelines state that the VC-75-1-A22 can be used for cleaning and drilling extraction for TE-C drills ( SDS-Plus ) and TE-Y ( SDS-Max ). When used with the DRS-D with a SDS-Max tool , the VC-75 can be used for dust collection when drilling diameters up to 32 mm ( 1.25 ”) on wall and floor applications . 2 The published item numbers here will provide OSHA 1926.1153 Table 1 compliant solutions . Previous generations will still need to utilize the objective data test report . Call Hilti for additional questions . 3 Hilti interprets a core drill as also being a OSHA 1926.1153 Table 1 ( vii ) “ drill ”, and therefore DD 110 and DD 150 and / or other hand held core drills are compliant when used with a shroud and dust collection system . 4 Hilti interprets these tools as large handheld angle grinders , which would therefore place them in OSHA 1926.1153 Table 1 section xii . These tools are OSHA 1926.1153 Table 1 complaint ONLY when used with the VC 300-17 X . However , you can use Hilti ‘ s objective data test report when using the VC 150 vacuums 5 OSHA 1926.1153 Table 1 engineering control method as specified in 29 CFR 1926.1153 . Core drills under OSHA 1926.1153 Table 1 ( vi ) “ rig mounted core drills ” are compliant when stand-mounted and used with a water delivery system .

Hilti ( Canada ) Corporation 1-800-363-4458 www . hilti . ca

WHD • 12 / 23